The view of the new electrical panel from the back. The panel itself is mounted onto a hinged plywood board that will drop down to a horizontal position, enabling easier troubleshooting and repairs. The back side is labeled, as is each individual wire. I have fabricated a negative buss bar. Each circuit will have a pair of wires for positive AND negative legs of the circuit, as opposed to having several fixtures use a common negative wire. While it adds a tiny bit to the cost of wire, it's no more difficult to run pairs of wire back to the common buss, and it should help isolate failures when they occur.

PREVIOUS PHOTO

BACK TO DIRECTORY

NEXT PHOTO